Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Top 10 typical forklift crashes ， forklift procedure need to pay attention to these issues ！.
Blog Article
Don't ignore the forklift at work. If the procedure is not good, there will certainly be severe accidents in mins, and there are lots of mishaps including forklifts.
Situation 1: The forklift freight blocked the chauffeur's view, and the person ahead could not be discovered, causing a moving accident.
Case 2: In order to maintain the balance of the forklift when lifting heavy products, the employees utilized their body weight as the counterweight, which nearly triggered casualties.
Case 3: The size of the forklift freight goes beyond the permitted size of the route and hangs on the roadside shelf, which virtually causes an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift vehicle driver did not observe the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift raises the workers illegally, the forklift motorist does not use the seat belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Instance 7: The forklift motorist did not put on a safety belt and fell from the automobile when it surrendered and was crushed.
Forklift procedure ought to pay attention to these issues ：.
Beginning.
1. Before starting, observe the surroundings, and after validating that there are no obstacles that impede the safety of driving, honk the horn initially and after that start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale have to be risk-free before starting.
3. When the forklift starts with a load, the vehicle driver should initially validate that the load is stable and trusted.
4. The begin has to be slow and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground ought to be kept at 300mm-400mm, and the pole must be slanted backwards. .
2. Do not raise the fork too high when driving. When getting in and leaving the job website or while driving, beware that there will certainly be no barriers in the sky. When the lots is traveling, the fork must not be elevated too expensive, which will impact the security of the forklift. .
3. After discharging, the fork needs to be decreased to the regular driving position before driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal needs to be released initially. High-speed doglegs are banned. High-speed doglegs will trigger the automobile to shed side stability and topple. .
5. When the forklift is downhill, it is purely restricted to turn off the flame and slide, and it is forbidden to brake suddenly while driving with tons unless there are special conditions.
6. When the forklift is running, it should follow the traffic rules in the manufacturing facility and have to keep a specific security distance from the automobile ahead. .
7. When the forklift is running, the lots must be in the lowest placement that does not hinder the driving, and the gantry ought to be effectively tilted back. The load shall not be raised except when piling or loading. .
8. The height of the load must not block the motorist's sight. In unique circumstances, when the item impacts the forward vision, drive at a reduced rate when turning around.
9. It is restricted to turn on the ramp, nor to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory area is 5 km/h, and it needs to drive securely at a reduced rate when getting in the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is forbidden for personnel to stand on the fork to hold things and play a stabilizing function. .
12. If issues are found, they will be repaired and reported in a prompt way, and they will never operate with health problems or conceal them.
packing and unloading.
1. When fork-loading things, the range between the two forks should be readjusted as needed to make the load of both forks well balanced and not manipulated, and one side of the product should be against the shelf. .
2. It is prohibited to collaborate with a single fork or use a fork top or draw. In special scenarios, safety warning signs have to be established to remind surrounding pedestrians. .
3. In the process of loading and discharging things, the forklift needs to be braked with the brake. .
4. The rate of the lorry must be slow and constant. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm people. .
5. When utilizing a fork to fork the goods, the fork should be as deep as feasible under the lots, and it should be noted that the fork pointer ought to not touch other items or objects. The tons needs to be stabilized with minimal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be slanted forward somewhat when the lots is lowered to enable easy placement of the lots and extraction of the forks. .
6. It is prohibited to fork items at high speed and ram difficult items with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so as to avoid the collapse of the goods and injure individuals. .
8. Overloading is restricted, and it is prohibited to utilize forks to raise employees to engage in high-altitude procedures to prevent high-altitude dropping crashes. .
9. It is not permitted to use the brake inertia to slip, put, round or roll things. .
10. It is not permitted to use forks to pick, turn pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you should discharge the goods or lower the fork structure.
2. Draw the parking brake take care of to dead or depress the parking brake switch.
3. The engine is shut off and the power is cut off. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Remove the key. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the look must be examined, and gas, lubricating oil and air conditioning water must be added.
2. Examine the safety and security performance of starting, running and stopping.
3. Inspect whether the lights and horn signals are total and effective.
4. During the operation of the forklift, examine whether the pressure and temperature level are regular.
5. After the forklift is running, the outside leakage should additionally be checked and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You have to examine before leaving the cars and truck;.
2. When you Electric Forklift Truck for Warehouse encounter somebody before Stand-on Electric Pallet Stacker you during driving, you must send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not exceed 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning need to not be as well sharp to prevent the propensity of "free turning";.
6. Adding and down the slope must be slow-moving and consistent, and no switching on the incline is allowed.
7. Do not drive across the slope. When the slope is above 10%, the car ought to be driven in reverse when worsening;.
8. When the forklift employees bring the goods and move on, if they come across big or heavy products and most likely to the chauffeur's line of vision, they should take the turning around workout
.
The "Eight Prohibitions" ought to be followed in the procedure.
1. Single fork operation is not enabled.
2. It is not permitted to lift the goods for far away driving.
3. It is not enabled to grab the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not allowed to make use of inertia pressure to get the goods.
6. It is not enabled to make use of braking pressure to expatriation round or easy-to-roll items.
7. It is not allowed to bring people to deal with the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is increased.
8. Do not drive laterally on slopes
.
Car park is not permitted under the following conditions.
1. Contours, slim roads, train crossings;.
2. Sections with a longitudinal slope higher than 5%.
3. When there is an barrier on one side of the road, the contrary side of the area with the exact same size as the obstacle should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844